LOCATION：
HOME >
Plastic Heteroclitic Saddle Ring
    • 1/5

Plastic Heteroclitic Saddle Ring

Plastic PVC Heteroclitic Saddle is an improvement of the rectangular saddle. The feature of the heteroclitic saddle packing is that it modifies the smooth fan-shaped arc side of the rectangular saddle into a concave shell-shaped arc or a wavy convex arc with raised ridges, which further increases the contact gap between the packing. This makes it more conducive to the flow and dispersion of gas and liquid in the packing layer. It also increases the number of openings to communicate the inner and outer surfaces of the packing and increase the free flow channels, which are beneficial to the distribution of liquid and the renewal of the surface. Therefore, the polypropylene heteroclitic saddle packing has higher treatment capacity and lower pressure drop than the rectangular saddle, and the mass transfer performance is improved.
INQUIRY
Detail

Plastic Heteroclitic Saddle Ring: The saddle-shaped packing resembles a saddle shape, and the liquid channels in this packing are mainly arc-shaped. The voids in the packing layer are more continuous than those in the ring-shaped packing (especially those in the Raschig ring packing), which allows the gas to flow mainly along the arc-shaped channels when flowing upward.


Plastic Heteroclitic Saddle Ring

Plastic Heteroclitic Saddle Ring



The product features of plastic asymmetric saddle ring: It has large void ratio, low pressure drop and transfer efficiency unit height, high bubble point, sufficient liquid-vapor contact, small specific gravity, high transfer efficiency, low pressure drop, large flow rate, high efficiency, large load flexibility, and good resistance to fouling. It is widely used in packing towers in the petroleum, chemical, chlor-alkali, coal gas, environmental protection and other industries.